home *** CD-ROM | disk | FTP | other *** search
/ Gold Medal Software 3 / Gold Medal Software - Volume 3 (Gold Medal) (1994).iso / utils1 / 3270v13a.arj / EZINSTL.BAT < prev    next >
DOS Batch File  |  1993-08-19  |  3KB  |  44 lines
  1. ECHO OFF
  2. CLS
  3. CD \DOS
  4. IF EXIST ASPI3*.SYS GOTO ASPI
  5. CLS
  6. ECHO ***********************************************************************
  7. ECHO **     You must start this INSTALLATION procedure from the root      **
  8. ECHO **     directory of a floppy drive.  For example, if you have        **
  9. ECHO **     inserted the DTC driver diskette in the A: drive, then        **
  10. ECHO **     make the A: drive the active drive by typing in A: at         **
  11. ECHO **     the DOS prompt and press 'Enter'.                             **
  12. ECHO **     Next, type in DTCSETUP and press 'Enter'.                     **
  13. ECHO **                                                                   **
  14. ECHO **     After the INSTALLATION procedure has completed, you can run   **
  15. ECHO **     the DTC installation program "INSTALL.EXE" directly from the  **
  16. ECHO **     directory where the DTC drivers have been installed into.     **
  17. ECHO ***********************************************************************
  18. GOTO end
  19. :ASPI
  20. ECHO       *****************************************************************
  21. ECHO       *****************************************************************
  22. ECHO       **                                                             **
  23. ECHO       **                                                             **
  24. ECHO       **          THIS DTC SCSI INSTALLATION PROGRAM IS ONLY         **
  25. ECHO       **          FOR THE DOS OPERATING SYSTEM.  THIS PROGRAM        **
  26. ECHO       **          REQUIRES THE DTC SCSI CONTROLLER TO BE             **
  27. ECHO       **          INSTALLED IN A SYSTEM, A SCSI HARD DRIVE TO BE     **
  28. ECHO       **          ATTACHED TO THE CONTROLLER AND THE SCSI DRIVE      **
  29. ECHO       **          TO BE PARTITIONED AND FORMATTED.                   **
  30. ECHO       **                                                             **
  31. ECHO       **          TO CONTINUE WITH THIS INSTALLATION PROGRAM         **
  32. ECHO       **          PRESS 'ENTER'.  TO EXIT THIS PROGRAM AND           **
  33. ECHO       **          RETURN TO DOS, PRESS 'CTRL' AND 'C' KEYS           **
  34. ECHO       **          SIMULTANEOUSLY.                                    **
  35. ECHO       **                                                             **
  36. ECHO       **                                                             **
  37. ECHO       *****************************************************************
  38. ECHO       *****************************************************************
  39. PAUSE
  40. INSTALL.EXE
  41. :end
  42. CD\
  43.  
  44.